TweetChime in Progress! from cindy wong on Vimeo.

I managed to make it work! Here’s it in action: Five Servomotors using the servo library within Arduino to function within sequence with room for a delay so each servomotor can complete their action before proceeding to the next action.

New things I learned:

1) Servo library can be used on non-PWM slots on the Arduino. You are not limited by slots 3, 5, 6, 9, 10, 11.

2) Heat shields are a must-have on a voltage regulator where you plan to have your device on for anything above 5 minutes (IMHO)

Photo of my breadboard setup -